In addition to excellent design, die-casting molds should also pay attention to some details during use in order to last for a long time. The following is a summary of 11 precautions for using die-casting molds, which are important! Please read it carefully.

1) When preheating, the initial firepower should not be too strong and should gradually increase, and the heating should start in the closed mode; When preheating, remove or cover parts on the mold that are not suitable for baking, such as sliders, springs, etc.

2) During the mold trial process, if there are changes to technical parameters, try not to change several parameters at the same time, otherwise it is impossible to determine which parameter has an impact on it.

3) During the debugging process, the pressure should gradually increase. Increasing it too much may cause mold sticking or result in too high parameter pressure.

4) When the mucous membrane appears and the casting is difficult to remove, it is necessary to clean it with wood or steel rods. It is strictly prohibited to use steel tools to strike, otherwise the mold will be damaged.

5) If it is determined that the mold cannot be processed due to mucous membranes or other reasons, it should be removed and handled by a professional mold master.

6) Before use, that is, before each die casting, it is necessary to clean the remaining burrs and debris on the surface of the mold as much as possible, otherwise it may damage the mold, cause casting burrs, and even fly materials.

7) During use, regularly lubricate all moving parts.

8) Mold work must undergo maintenance at certain times

9) The cooling water flow rate should be set according to different positions to adjust the overall temperature to be consistent

10) Regularly replace vulnerable parts to ensure the quality of die-casting parts.

11) The mold needs regular maintenance and upkeep.

The above are 11 precautions for using die-casting molds, which are important! The content of.